Home > Joint paint & Tack Coat > Emulsion / Tack Coat
Availability
No stock, delayed despatch
Colspray is a bitumen cold joint sealer & tack coat spray that is applied onto vertical edges and the surface base before the application of asphalt. It will increase the bond of the material to the substrate and waterproof the area. This will significantly enhance the reinstatement’s performance by preventing the ingress of water and freeze/thaw effect.
Where to use?
What is it?
Technical
Colspray is supplied in 750ml spray cans, with the bitumen being discharged by inverting the container and pressing the spray button.
Preparation
Remove as much standing water and loose particles as possible prior to product application. The sealer can be applied to damp or dry surfaces.
Application
Hold the can tightly and shake vigorously before use. Invert the can and press the spray button. Cover the area to be sealed with long strokes from a distance of 175mm to 250mm, working from the top downwards. Ensure that the entire surface is covered.
Cleaning
Point nozzle upward immediately after use and spray for a few seconds to clear it, taking care not to spray into wind. Failure to clean the nozzle after use could result in the aerosol becoming blocked rendering the product unusable.
Storage
Aerosol cans must NOT be exposed to direct sunlight or temperatures above 50°C. Store in a cool well-ventilated place.
Health, Safety and Environmental
Please ensure that appropriate PPE is used when preparing, mixing and applying products. Always wash your hands before consuming food and make sure that materials are kept safely out of reach of children and animals. Please dispose of packaging and waste responsibly and in accordance with local authority requirements. A full material datasheet relating to this product is available to download.
Be the first to Write a Review for this item!